項目1 液壓與氣壓傳動技術基礎 (Item1 Fundamentals of Hydraulic and Pneumatic Transmission Technology) 任務1.1 認識液壓與氣壓傳動的特點及應用(Task1.1 Cognitive the Characteristics and Application of Hydraulic and Pneumatic Transmission) 1.1.1 液壓與氣壓傳動的定義(Definition of Hydraulic and Pneumatic Transmission) 1.1.2 液壓與氣壓傳動發展(Development of Hydraulic and Pneumatic Transmission) 1.1.3 液壓與氣壓傳動的優缺點(Advantages and Disadvantages of Hydraulic and Pneumatic Transmission) 1.1.4 液壓與氣壓傳動的應用(Application of Hydraulic and Pneumatic Transmission) 任務1.2 液壓千斤頂、平面磨床工作台液壓系統工作過程分析(Task1.2 Working Process Analysis of Hydraulic Jack and Surface Grinder Table Hydraulic System) 1.2.1 液壓千斤頂液壓系統工作過程分析(Working Process Analysis of Hydraulic Jack System) 1.2.2 平面磨床工作台液壓系統工作過程分析(Working Process Analysis of Surface Grinder Table Hydraulic System) 1.2.3 液壓與氣壓傳動系統的組成和表示方法(Composition and Representation of Hydraulic and Pneumatic Transmission System) 項目2 液壓油及其流動特性分析 (Item2 Analysis of Hydraulic Oil and Its Flow Characteristics) 任務2.1 液壓油的辨識與選用(Task2.1 Identification and Selection of Hydraulic Oil) 2.1.1 液壓油的種類(Types of Hydraulic Oils) 2.1.2 液壓油的辨識(Identification of Hydraulic Oil) 2.1.3 影響液壓油黏度的因素(Factors Affecting Viscosity of Hydraulic Fluid) 2.1.4 液壓油的選擇(Selection of Hydraulic Oils) 任務2.2 壓力形成分析(Task2.2 Pressure Formation Analysis) 2.2.1 壓力形成(Pressure Formation) 2.2.2 靜壓力及其特性(Static Pressure and Its Characteristics) 2.2.3 壓力表示方法(Representation of Pressure) 2.2.4 帕斯卡定理(Pascal's Law) 任務2.3 分析液體的流動狀態與能量形式(Task2.3 Analysis of Flowing State and Energy Form of Liquid) 2.3.1 流動的產生(Formation of Flowing) 2.3.2 流量和流速(Quantity and Velocity of Flow) 2.3.3 液體的流動狀態(The Flowing State of a Liquid) 2.3.4 連續性方程(Continuity Equation) 2.3.5 伯努利方程(Bernoulli Equation) 2.3.6 管道內的壓力損失(Pressure Loss In Pipe) 2.3.7 熱交換器(Heat Exchanger) 任務2.4 液壓油的污染和控制(Task2.4 Hydraulic Oil Contamination and Control) 2.4.1 工作介質污染原因(Reasons for the Pollution of the Working Medium) 2.4.2 工作介質污染的危害(Hazards of Working Medium Pollution) 2.4.3 工作介質污染控制(Work Medium Pollution Control) 2.4.4 濾油器的選用(Selection of Oil Filters) 2.4.5 空氣濾清器的選用(Selection of Air Filter) 任務2.5 分析液壓衝擊和氣穴現象(Task2.5 Analysis of Hydraulic Shock and Cavitation) 2.5.1 分析液壓衝擊現象(Analysis of Hydraulic Shock) 2.5.2 分析氣穴現象(Analysis of Cavitation) 2.5.3 利用蓄能器吸收液壓衝擊(Using Accumulator to Absorb Hydraulic Shock) 項目3 液壓泵工作特性分析與選用 (Item3 Working Characteristics Analysis and Selection of Hydraulic Pump) 項目4 液壓缸/液壓馬達的工作特性分析與選用(Item4 Working Characteristic Analysis and selection of Hydraulic Cylinder/Hydraulic Motor) 項目5 方向控制閥及方向控制迴路 (Item5